The floor heating water separator is composed of a water distribution main pipe and a water collection main pipe. The water distribution main pipe is connected to the water supply pipe of the pipe network system. Its main function is: to bury the hot water from the water separator of the pipe network system under the floor. The floor heating pipes are distributed to each room that needs floor heating.

When the hot water flows in the floor heating pipe, it transfers heat to the floor, and then radiates heat through the floor to the room. The other end of the floor heating pipe is connected to the water collecting main pipe of the water sub-catchment, and the return water whose temperature is lowered after the indoor heat is dissipated is returned to the pipe network system through the water collecting main pipe to complete a cycle.

The manifold is the "hydraulic hub" of the floor heating system

Due to the influence of hydraulic characteristics, the length of floor heating heating pipes needs to be limited within a certain range. Therefore, the area covered by a loop is limited. For this reason, the realization of heating in a region must be realized through multiple loops, and the device that distributes and collects the heat medium for these multiple loops is the manifold, so people usually call the manifold It is a "water conservancy hub" in the underfloor heating system.

Judging from the installation diagram of the floor heating water separator, the structure of the floor heating water separator is actually not complicated. In the dispute between imported and domestic products, consumers can use the structure of the floor heating water divider to measure whether the manufacturing process of the floor heating system and the auxiliary materials are regular. For the specific installation process and construction pictures, the user can learn more about the "floor heating installation manual" .